테슬라 소프트웨어 2025.14.3 N/A

High beams now adapt to reduce glare for other drivers and cyclists. By detecting other road users, and selectively dimming individual pixels of the headlight, your high beams stay on more often for greater visibility at night.

To turn them on, go to Controls > Lights > Adaptive Headlights.

The Blind Spot Camera feed is now available on the instrument panel.

Go to Controls > Display > Automatic Blind Spot Camera and select Driver Display.

Multiple trip plans are now available for you to choose from, allowing you to better suit your travel needs.

- Fastest: offers the quickest route.

- Best Amenities: prioritizes stops near open and highly rated restaurants, shops, and restrooms.

- Fewer Stops: minimizes charging stops.

Navigation can now avoid highways when possible, providing an alternative route that bypasses major roads.

Go to Controls > Navigation > Avoid Highways.

Your vehicle's side cameras (B-Pillar) will now be recorded to both Dashcam and Sentry clips. The Dashcam Viewer app has also been updated with a grid view, making it easier to access and review recordings.

Customize the opening height of your trunk and save it as the default or for a specific location, such as your garage. To set a height, pause the trunk while it's moving using the touchscreen. Alternatively, manually adjust to your preferred height, then press and hold the trunk close button until you hear a chime.

To set your existing trunk opening to the factory default height, or to clear any saved locations, go to Controls > Service > Remove Saved Locations.

This feature warns you if your vehicle drifts near or out of your lane. With this update, it can now also assist you. When enabled, a blue indicator line will appear on the touchscreen, showing which lane marking is being crossed. You can customize Lane Departure Avoidance in Controls > Autopilot > Lane Departure Avoidance.

Additionally, you can enhance safety by preventing unintended lane departures with Emergency Lane Departure Avoidance. Go to Controls > Autopilot > Emergency Lane Departure Avoidance.

Customize the opening height of your frunk and save it as the default or for a specific location, such as your garage. To set a height, pause the frunk while it's moving using the touchscreen. Alternatively, manually adjust to your preferred height, then press and hold the frunk exterior button until you hear a chime.

To set your existing frunk opening to the factory default height, or to clear any saved locations, go to Controls > Service > Remove Saved Locations.

Your vehicle will now automatically transition to Comfort Drive Mode when Autopilot is engaged. This setting is enabled by default.

To disable, go to Controls > Dynamics > Use Comfort Drive Mode in Autopilot.

Easily switch between different language input methods on your touchscreen. To add keyboards, go to Controls > Display > Keyboards. To switch between them, long-press the global icon on your keyboard and select the desired keyboard.

Use or charge devices through the low voltage outlets, USB ports, or the inductive phone charger after exiting the vehicle, as long as the battery is above 20%.

When enabled, these ports remain powered even if you are not present, and the vehicle is not in use. Note that this may increase the vehicle’s power consumption, even if no device is connected.

Go to Controls > Charging > Keep Accessory Power On.

- DC 고속 충전 케이블을 연결하고 배터리가 고속 충전에 너무 차가울 경우, 예상 남은 배터리 가열 시간이 표시되어 충전을 시작할 수 있는 시점을 알려줍니다. (차량 선택)

- 이제 서비스 방문 없이도 새 키 팹을 페어링할 수 있습니다. 컨트롤 > 서비스 > 키 팹 페어링으로 이동합니다. (차량 선택)

- 충전 케이블이 얼어붙어 고정된 경우 충전 포트를 가열합니다. 컨트롤 > 서비스 > 충전 포트 히터로 이동합니다. (차량 선택)

- 주행 중 더 정확한 배터리 에너지 추정이 개선되었습니다. (Model 3 및 Model Y 차량 선택)

- 음성 내비게이션 안내가 이제 체코어로 제공됩니다. 컨트롤 > 디스플레이 > 음성 내비게이션 언어로 이동합니다. (유럽 지도만 해당)

- 폴리토피아 전투 - 재작업된 아쿠아리온이 도착했습니다! 인어가 육지와 바다를 지배하고, 상어와 해파리와 함께 휴식을 취하고, 잃어버린 바다 도시를 발견하세요. (MCU 2+)

- 중요한 보안 강화 및 개선 사항이 포함되었습니다.

- 사소한 수정 및 성능 향상이 적용되었습니다.

The Sentry Mode menu has been updated to make it easier to turn on Sentry Mode for a one-time use.

Under Controls > Safety, Tesla now has separate controls to turn on and off Sentry Mode one time (the button with the Sentry Mode icon) and the option to enable Sentry Mode whenever the vehicle is parked.

The exclude home, work and favorites options only show up when you enable Sentry Mode when parked.

In regions where km/h are used, Tesla has updated the speedometer to properly reflect km/h instead of KM/H.

이 업데이트는 서비스 모드에 다음을 포함한 여러 가지 새로운 기능을 추가합니다.

- 새로운 브레이크 패널(Cybertruck)

- 브레이크 패널 업데이트(모든 차량)

- 새로운 스피커 패널(2024년 이상 모델 3 및 AMD Ryzen이 장착된 모델 Y)

- SSCM 패널 업데이트 - 그래픽 및 스왑 버튼(2021년 이상 모델 S, 2021년 이상 모델 X, 2024년 이상 모델 3)

- 새로운 내부 조명 패널(2024년 이상 모델 3 및 Cybertruck)

For HW4 vehicles, the Camera app has been updated so that the repeater cameras are now displayed at the top instead of the bottom. Each camera feed is also labeled so that users can more easily identified the rear, left and right cameras.

In addition, the field of view for the rear camera is now also wider, not only in the vehicle, but also when viewing the rear camera through the Tesla app.